Drive Shaft Using and Maintenance
In order to ensure the normal operation of the drive shaft and extend its service life, it should be noted in use:
1. It is strictly forbidden to start with a high speed gear.
2. Do not lift the clutch pedal.
3. It is strictly forbidden to overload the car and speed it.
4. Always check the working condition of the drive shaft.
5. Always check the fastening condition of the drive shaft hanger, whether the supporting rubber is damaged, whether the connection parts of the transmission shaft are loose, and whether the transmission shaft is deformed.
6. In order to ensure the dynamic balance of the drive shaft, always pay attention to whether the balance soldering piece is desoldered. The new drive shaft assembly is provided. When loading the new drive shaft, pay attention to the assembly mark of the telescopic sleeve, and ensure that the flange fork is in one plane. When repairing and disassembling the drive shaft, the assembly marks should be printed on the telescopic sleeve and the flange shaft in order to maintain the original assembly relationship during reassembly.
7. Grease joints should always be filled with grease. In the summer, the No. 3 lithium grease should be injected, and in the winter, the No. 2 lithium grease should be injected.